INSULATED METAL PANELS

Automated efficiency takes EnvaTherm® insulated back pans and curtain-wall engineering to a new level. Innovation in foam delivery technology yields soft, even, self-sealing insulation that provides a competitive R-value for consistent, real-world performance. Unlike fibrous insulation, the insulation forms a self-sealing bond to the metal back pan shell so there is no risk of shifting/sagging or convective looping.

ENERGY EFFICIENT PANELS

EnvaTherm® insulated back pans are used in curtain wall systems in conjunction with opaque glass panels or architectural metal panels for areas that do not require transparent glass.

FEATURES

    • Local & fully certified manufacturing process;
    • Fire-tested (CAN/ULC S134) for multi-storey non-combustible construction. See the full fire test here;
    • Pre- and post-consumer recycled content;
    • No VOC’s, foam insulation is 100% water-blown;
    • Will not sustain mold growth;
    • Up to 50% lighter than competing products;
    • Lean manufacturing and precision equipment reduce waste and lead times.

CERTIFICATES

    • Constructed in accordance with Intertek Design Listing LEI-IMWP 25-01
    • Spec. ID 28934
    • Inspections four times a year

THE AIR SEAL & ADHESION CAPABILITIES

    • Factory-applied low-density foam insulation which prevents heat drumming and whistling
    • Insulated for both air and water.
    • No loss of thermal performance due to convective looping.
    • Certified air barrier material ASTM E 2178-03 Intertek Project 3181312

ENVATHERM’S LOW WEIGHT AND HANDLING

    • Commonly described as “light as air
    • In combination with our panels, they are up to 50% lighter than competitive fibrous products
    • More cost-effective for handling, shipping, and installation

WASTE & ENVIRONMENTAL CONSIDERATION

    • Pre and post-consumer recycled metal components.
    • Foam is 100% water-blown, uses no synthetic blowing agents or synthetic blowing agents, and is PBDE free
    • Near 100% utilization of of on-site materials
    • Safe and stable after curing
    • Will not support growth of mold (ASTM C1338 (2008) Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings, Intertek Canadian Project Number G100033767)
  • image
  • image
  • image
  • image
  • image
  • image
  • image
  • image
  • image
  • image
  • image
  • image

DOWNLOAD